Table of Contents
Advertisement
2.3 Appliance Preparation for Installation
2.3.1 Standard Installation
Remove the screws that secure the cover plate on the side of the appliance. These screws secure the cover plate and the
finishing trim.
Remove and discard the finishing trim. Reinstall the cover plate and screws. Complete on both sides of appliance. This
allows your framing to be flush with the body of the appliance so finishing material butts up against the 1/2" finishing edge.
2.3.2 Corner Installation
Remove the screws that secure the cover plate of the side of the appliance in which you want the side glass to be exposed.
Discard the cover plate. Reinstall the the finishing trim. This trim is where your finishing material will butt up against.
On the side of the appliance that will not be an exposed corner remove the same screws that secure the cover plate and
finishing trim. Discard the finishing trim on this side. Reinstall the screws to secure the cover plate.
2.3.3 3-Sided (Bay) Installation
Remove the screws securing the cover plate on one side of the appliance which will expose the side glass.
Discard the cover plate. These screws also secured the previously unused finishing trim. This finishing trim is in a shape of a
"C" and you will reinstall this trim with the previously removed screws. This trim is where your finishing material will butt up
against.
Repeat for the other side of the appliance. You will now have all 3 sides of the appliance viewing glass exposed.
Hussong Mfg. Co, Inc.
Osseo E-Series Electric Fireplace
Figure 1.3 - Cover Plate Removal
11
Starting Serial Number: 23 OSE5000001 28,
Rev. 2 - Sept. 2023
23 OSE6400001 28, 23 OSE8000001 28
Advertisement
Table of Contents
