Operating Instructions; Methods Of Operation; Pairing The Remote To The Appliance - kozy heat Osseo E Series Installation And Operation Manual

5.0 Operating Instructions

5.1 Methods of Operation

WARNING: Read and understand this entire installation and operation manual, including all safety information, before plug-
ging in or using this product. This appliance must be properly installed before use. Failure to do so could result in electric
shock, fire, serious injury, or loss of life. Do not tamper with any controls.
Note: When the appliance is first turned on, a slight odor may be present. This is normal and should not occur again unless the
appliance is not used for a long period of time.
•
This appliance has two locations to perform fireplace operations. The first interface location is the control panel located
on the appliance and the second interface location is the remote control.
•
The control panel located on the appliance performs a set of features that are specific this control panel.
•
The remote control performs a set of features that are specific to the remote control.

5.2 Pairing the Remote to the Appliance

To pair the remote to the appliance, first turn on the main switch to put the fire in standby mode. Press and hold the 2 buttons
indicated for 5 seconds, then release and press the power button on the remote to complete the pairing process. To ensure
the pairing process has been successful simply press the power button on the remote to turn the appliance on and off. If the
appliance does not turn on / off repeat the process.
Buttons to pair with remote
Figure 5.1 - Appliance Control Panel
Hussong Mfg. Co, Inc.
Osseo E-Series Electric Fireplace
40
Starting Serial Number: 23 OSE5000001 28,
Rev. 2 - Sept. 2023
23 OSE6400001 28, 23 OSE8000001 28