Optional Markings - Siemens SIMATIC ET 200eco PN M12-L System Manual

7.7.2

Optional markings

Introduction
In addition to the factory markings, there are also optional possibilities for labeling and/or
identifying interfaces and I/O devices on the ET 200eco PN M12‑L distributed I/O system.
Identification label
The identification labels come with each I/O device as strips and can be machine-printed. A
strip has 10 identification labels measuring 10 x 5 mm in the color RAL9016. The
identification labels can be inserted into every I/O device at the points provided. The
identification labels are used for channel and I/O device labeling.
The figure below shows all points where you can attach the identification labels.
①
Figure 7-10 Optional marking
Distributed I/O system ET 200eco PN M12-L
System Manual, 11/2023, A5E48753295-AG
Identification labels
7.7 Marking the ET 200eco PN M12-L
Connecting
65