Siemens SIMATIC ET 200eco PN M12-L System Manual page 45

Dimensions of plug cover
The figure below shows the dimensions of the plug cover.
Figure 6-5 Dimensions of plug cover
Requirement
The mounting of the I/O module is prepared according to the description of these sections:
1. Basics (Page 39)
2. The planned mounting variant:
– Mounting without mounting rail (Page 40)
– Mounting with mounting rail (Page 42)
Required tools
For the mounting you will need:
• A screwdriver, suitable for the fixing screws used for the module.
• A TX 10 screwdriver for the plug cover
Distributed I/O system ET 200eco PN M12-L
System Manual, 11/2023, A5E48753295-AG
Mounting
6.4 Installing the plug cover
45