Siemens SIMATIC ET 200eco PN M12-L System Manual page 35

Area of application
The areas of application of the ET 200eco PN M12‑L are derived from its special properties:
• A robust design and degrees of protection IP65/IP67 and IP69K make the
ET 200eco PN M12‑L distributed I/O device suitable for use in harsh industrial
environments
• The distributed I/O ET 200eco PN M12‑L with the IP54 degree of protection is suitable for
use in Zone 2/Zone 22 hazardous areas.
• The compact design of the ET 200eco PN M12‑L enables use in confined areas without
control cabinets.
• The easy handling of ET 200eco PN M12‑L facilitates fast commissioning and
maintenance.
Configuration
The SIMATIC ET 200eco PN M12‑L distributed I/O system is made up of the following I/O
devices:
• I/O device analog inputs
• I/O device digital inputs
• I/O device digital outputs
• Digital inputs/outputs of the I/O device
• I/O device IO-Link Master
The I/O devices of the ET 200eco PN M12‑L are connected to an IO controller via
MultiFieldbus.
Configuration example
The figure below shows an example configuration with the ET 200eco PN M12‑L distributed
I/O devices in a PROFINET IO network.
Figure 5-2 Configuration example of the ET 200eco PN M12‑L
Distributed I/O system ET 200eco PN M12-L
System Manual, 11/2023, A5E48753295-AG
5.1 What are the SIMATIC ET 200eco PN M12-L distributed I/O devices?
System overview
35