Solid-State Drive Installation; Figure 3-2: Hdd Bracket Retention Screws - IEI Technology PPC2-C ADL Series User Manual

PPC2-Cxxx-ADL Series Panel PC

3.6 Solid-State Drive Installation

One 2.5" SATA HDD drive can be installed in the PPC-Cxxx-ADL. To install the HDD into
the system, please follow the steps below.
Step 1: Remove the back cover see Figure 3-1.
Step 2: Remove the three screws securing the hard drive bracket to remove the hard
drive bracket. See Figure 3-2.

Figure 3-2: HDD Bracket Retention Screws

Step 3: Place an HDD onto the drive tray and secure the HDD with the bracket by
inserting four retention screws (M3*4) into the bottom of the HDD (Figure 3-3).
Page 23