Planet GS-4210-8UP2S User Manual page 323

Instance Command:
Object
 Command
 Port
ERPS state:
Object
 Protection State
 Port 0
 Port 1
 WTR Remaining
 RPL Un-blocked
 Port 0 Block Status
 Port 1 Block Status
User's Manual of GS-4210-8UP2S/GS-4210-16UP4C/GS-4210-24UP4C
Description
Administrative command. A port can be administratively configured to be in either
manual switch or forced switch state.
Port selection - Port0 or Port1 of the protection Group on which the command is
applied.
Description
ERPS state according to State Transition Tables in G.8032.
OK: State of East port is ok
SF: State of East port is Signal Fail
OK: State of West port is ok
SF: State of West port is Signal Fail
Remaining WTR timeout in milliseconds.
APS is received on the working flow.
Block status for Port 0 (Both traffic and R-APS block status). R-APS channel is
never blocked on sub-rings without virtual channel.
Block status for Port 1 (Both traffic and R-APS block status). R-APS channel is
never blocked on sub-rings without virtual channel.
323