Switching
■ Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation, and
auto MDI/MDI-X
■ Features Store-and-Forward mode with wire-speed filtering and forwarding rates
■ IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
■ 10K jumbo frame
■ Automatic address learning and address aging
■ Supports CSMA/CD protocol
Power over Ethernet
■ Complies with IEEE 802.3bt Power over Ethernet Plus Plus
■ Backward compatible with IEEE 802.3at Power over Ethernet Plus
■ Up to 8/16/24 ports of IEEE 802.3at/IEEE 802.3bt PoE devices powered
■ 8/16/24 PoE ports with built-in 802.3bt type-4 PoE 95W injector function
■ All PoE ports support 802.3at end-span/mid-span PoE 36W injector function (GS-4210-16UP4C/24UP4C only)
■ Auto detects powered device (PD)
■ Circuit protection prevents power interference between ports
■ Remote power feeding up to 100 meters in standard mode and 250m in extend mode
■ PoE management
PoE admin-mode control
PoE Consumption and allocation mode option
Temperature threshold control
PoE Budget 720W/660W/600W(Factory default) mode option (GS-4210-24UP4C only)
Per port PoE function enable/disable
PoE PD Type for Standard/Legacy/UPOE mode option (GS-4210-8UP2S only)
Per port PoE Inline mode option (802.3BT (Factory default)/End-span/Mid-span) (GS-4210-16UP4C/24UP4C
only)
Per port PD type option (Standard(Factory default)/Legacy/Force) (GS-4210-16UP4C/24UP4C only)
PoE port power feeding priority
PD classification detection
■ Intelligent PoE features
PoE extension
PoE schedule
PD alive check
User's Manual of GS-4210-8UP2S/GS-4210-16UP4C/GS-4210-24UP4C
22