Configure IP address
The GS-4210 802.3BT PoE++ Series is shipped with default IP address as follows:
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the GS-4210 802.3BT PoE++ Series, please use the procedures
as follows:
Display of the current IP address
At the "GS-4210 Series#" prompt, enter "show ip".
1.
2.
The screen displays the current IP address, Subnet Mask and Gateway shown in
Configuration of the IP address
On " GS-4210 Series#" prompt, enter "configure".
3.
On "GS-4210 Series(config)#" prompt, enter the following command and press <Enter> as shown in
4.
GS-4210 Series(config)# ip address 192.168.1.100 mask 255.255.255.0
GS-4210 Series(config)# ip default-gateway 192.168.1.254
The previous command would apply the following settings for the Managed Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
5.
Repeat Step 1 to check if the IP address is changed.
If the IP is successfully configured, the GS-4210 802.3BT PoE++ Series will apply the new IP address setting immediately. You
can access the Web interface of GS-4210 802.3BT PoE++ Series through the new IP address.
If you do not familiar with console command or the related parameter, enter "?" anytime in console to
get the help description.
User's Manual of GS-4210-8UP2S/GS-4210-16UP4C/GS-4210-24UP4C
Figure 5-2 IP Information Screen
Figure 5-3 Setting IP Address Screen
347
Figure
5-2.
Figure
5-3.