Table of Contents
Advertisement
9 Operation
9.1
Mode
Manual and Automatic mode
The analyzer can be started in automatic mode (Menu> Automatic), depending on the time or
via an external button or flow switch. In manual mode (automatic off), functions such as
starting analysis, conveying reagent or flushing can be manually controlled. In addition, a
diagnostic function is included in manual mode to test individual device components.
In automatic mode, analyses are carried out at the programmed interval or by external starting.
After switching on, the automatic mode is active. The first analysis is started after switching on
at the programmed internal interval after 3 minutes. All subsequent analyses are performed in
the programmed interval
9.2
Main Menu
The main menu can be opened by pressing the [Menu] key from the measured value view.
Menu item
Description
Automatic
Changing between automatic and manual mode
Parameter
Setting the device and analysis parameters
Info
Overview of hardware- and software version and display of counter readings
Service
Functions for maintenance, diagnostics, and changing reagent
Assistant
Setup wizard for a guided parameterisation of the device
History
Display of the last 100 measurement results with date and time
54
Operation
Waltron User Manual 101-048-E.1
6051 Hardness Analyzer
Advertisement
Table of Contents
