Table of Contents
Advertisement
File name
Type
trend.csv
Data
error.csv
Data
history.dat
System
setting.dat
System
logfile.dat
System
TA27xxx.bin
Operating
system
56
Content
Measured values in tabular form with date, time and measured value
The data becomes filed in the following format: YYYY.MM.DD [Tab] hh.mm
[Tab] x.xxx [Tab] Unit [LF]
The measured values (x.xxx) are stored on the device in the unit displayed.
Error messages in tabular form with time, date, and error.
The data becomes filed in the following format: YYYY.MM.DD [Tab] hh.mm
[Tab] Error code [LF].
Time-stamped analysis results
The device loads these into the internal memory at start-up.
Complete device setting of the analyzer (optional file).
Before replacing the analyzer, you can transfer the saved device
configuration directly to the new device. The export is located in the menu
under Parameters> General> Export settings. The device configuration can
be imported in the menu under: Parameters> General> Import settings.
Date, time stamp and device start
This file is needed for internal purposes.
This file is not on the SD card by default. If there are any software updates
for your analytical instrument, they will be made available to you by our
sales partners or can be downloaded from our homepage. You can copy this
file to the SD card and perform a software update. More information about
installing a software update can be found on page Error! Bookmark not
defined..
We recommend that you delete the file from the SD card after installing an
update.
Operation
Waltron User Manual 101-048-E.1
6051 Hardness Analyzer
Advertisement
Table of Contents
