Introduction
Reliable, exact and fully automatic analyzing unit with matching reagents for measuring
the total hardness in the range 0.02-30 °dH (3.6- 5349 µmol/l)as well as carbonate
hardness in the range 0.3 – 9 °dH (53.5 – 1605 µmol/l)
Measurement of all parameters with one sensor.
Simple commissioning with configuration assistant.
BOB-Operation(72h)-salt boiler
Self-calibrating and self-monitoring
High measuring accuracy
Easy maintenance and cleaning.
Compact design 300x300x140mm.
Multi-coloured and multi-lingual graphic display.
Relay output for limit value.
Relay output for error message.
1 analogue output 0/4-20mA.
1 digital input for start analysis, flow switch, or interval reset.
Measurement data storage.
Diverse programmable alarm functions
Connection possibilities for: water-meters; turbines; pre-coolers; rinsing valves
External operation by means of external controller
Many programmable functions for the inputs and outputs
Monitoring of 2 limit values
No condensation
CAN- interface
Software updates by means of SD-card possible
Open wall mounting or wall mounting in protective casing (optional)
Supply voltage 85 - 305 VAC, 47 – 440 Hz
Waltron User Manual 101-048-E.1
6051 Hardness Analyzer
9