Table of Contents
Advertisement
Configuration
Set analysis start
Your setting:
Your setting:
Your setting:
Your setting:
Your setting:
Waltron User Manual 101-048-E.1
6051 Hardness Analyzer
Select whether the analysis should be started after a time
interval, after a discharge or both.[OK]
You have the possibility to start an analysis via one of the
following:
External contact, time, amount, time and amount
Select and confirm [OK].
Select [external contact)
After selecting external contact, no further settings are
necessary.
Selection [time]
After selecting time, you will be invited to select a time
interval between measurements:
Select the required time interval [OK].
001 – 999 min
Via the navigations-keys, select the value and confirm [OK]
Selection [amount]
Select the unit of measurement for the amount of water
discharged [OK]
You are given the following choices:
l, hl, m3, gallons(US), gallons(Imp)
Select the value using the navigations-keys and confirm[OK]
Select the amount after which the analysis should start [OK]
e.g. 1000 l
Select the value using the navigations-keys and confirm[OK]
Selection[time and amount]
As above.
49
Advertisement
Table of Contents
