Space-Ray ADU25 Installation And Operation Instruction Manual page 31

Fig. 21k
11. Attach the reflector spacer brackets at each tube support/hanger bracket. using the #10-24 machine
screws supplied in fastening kit. See figure 21l below:
Fig. 21l
12. Place the upper reflector panels over each of the reflector spacer brackets. Repeat the same reflector
positions and overlap dimensions as specified in table 14, see step 9 above. To align reflectors precisely to
the ends of the lower reflector, hold the end cap in place against the lower reflector slide the upper reflector
to rest against it. See figure 21m below.
Fig. 21m
-30-
Form #44201100
Oct 2019