Table of Contents
Advertisement
User's Manual
UTE9800+ Series Smart Digital Power Meter
10.2 Specification of Fuse
This instrument has 1 spare fuse stored in the fuse box. If the fuse was burned out, replace the fuse as the follow
steps.
1） Pull out the power cable, use small screwdriver to take out the fuse box, as shown in the following figure.
If the fuse was burned out, please replace the same specification fuse with the instrument.
The specification fuse with the instrument, see the following table.
Model
Specification of Fuse
UTE9802+/UTE9806+/UTE9811+
AC250V F0.5A
3） After the replacement, please put the fuse box back , as shown in the following figure.
Instruments.uni-trend.com
54 / 55
Advertisement
Table of Contents
