Table of Contents
Advertisement
User's Manual
Explanation
Only when the communication command sets to Modbus, submenu"Addr" can display. The setting method of
communication command can refer to section 6.1
The Modbus communication address range of UTE9802+ is 1-99.
6.2.3 Baud Rate and Modbus Communication Address Setting of UTE9806+
Steps
1. Press【Shift】and【Setup】key to enter Utility menu;
2. Press【▲】or【▼】key to select if and press【OK】key to enter if menu;
3. Press【▲】or【▼】key to select Com, as shown in the following figure;
4. Press 【 OK】 key to enter Baud menu， and press 【 ▲】 or 【 ▼】 key to select 1200, 2400, 4800, 9600, 19200,
38400, 57600, 115200 (the default is 9600);
5. Press 【 OK 】 key to save the currently selected and enter the communication address, as shown in the
following figure;
Instruments.uni-trend.com
UTE9800+ Series Smart Digital Power Meter
41 / 55
Advertisement
Table of Contents
