Table of Contents
Advertisement
User's Manual
The rear panel of UTE9806+ is as shown in the following figure.
The function description of UTE9802+/UTE9806+/UTE9811+ rear panel is as shown in the following table.
No.
1
2
3
4
5
Chapter 3 Operating Preparation and Measurement Display
3.1 Operating Preparation
3.1.1 Connecting Power Cable
The operating voltage of the instrument is 100V~240V (50/60Hz), please make sure the power supply is within
the rated voltage of this instrument, and make sure the instrument is well grounded.
Instruments.uni-trend.com
Picture of parts
Under test load/LOAD terminal, it usually used to connect to the
input port of the product to be test.
Under test input terminal /SOURCE terminal，it usually used to
connect to the output port of AC power.
Three-wire power socket and fuse
Ground terminal
RS232/RS485 communication interface
UTE9800+ Series Smart Digital Power Meter
Description
18 / 55
Advertisement
Table of Contents
