UNI-T UTE9800+ Series User Manual page 34

User's Manual
"P-Hi" or"P-Lo" as shown in the following figure；
2. Press 【 ENTER 】 key to enter numerical value editing state, press 【 ▲ 】【 ▼ 】【 】【 】【
to edit the numerical value ；
3. Press【ENTER】key save the setting；
4. Press【 】or【 】key to select other submenu, or press【SETUP】key to exit SETUP menu.
Explanation
"A-Hi"represents the upper limit of current."A-Lo" represents the lower limit of current.
"P-Hi" represents the upper limit of power. "P-Lo" represents the lower limit of power.
*Notes: when editing the numerical value, the lower limit cannot greater than the upper limit.
Otherwise it will prompt "--oF-"and the setting cannot be saved when press【Enter】key.
5.2 Alarm Delay (UTE9802+/UTE9811+)
·Steps
1. Press【SETUP】key to enter SETUP menu，press【 】or【 】key to select submenu "tiME" as shown
in the following figure；
2. Press 【 ENTER 】 key to enter numerical value editing state, press 【 ▲ 】【 ▼ 】【 】【 】 key to edit
the numerical value ；
3. Press【ENTER】key save the setting；
4. Press【 】or【 】key to select other submenu, or press【SETUP】key to exit SETUP menu.
Instruments.uni-trend.com
UTE9800+ Series Smart Digital Power Meter
】 key
34 / 55