Table of Contents
Advertisement
User's Manual
6. Press【▲】,【▼】, 【 】,【 】key to edit address, the range is: 000～255;
7. Press【OK】key to save the currently selected and return to previous menu;
8. Press【Hold】key to return to previous menu.
·Explanation
UTE9806+ supports RS232 and RS485 interface. Both interfaces have the same baud rate and are set using the
methods described in this section.
Chapter 7 System Function
7.1 Initialization
7.1.1 Initialization Setting of UTE9802+/UTE9811+
Steps
1. Long press 【 ENTER 】 (Utility) key to enter Utility menu, and the submenu is "init" as shown in the
following figure；
2. Press【ENTER】key to enter the next option, and the press【▲】or【▼】key to select NO or YES；
3. Press【ENTER】key to select the current option；
4. Press【 】or【 】key to select other submenu, or press【SETUP】key to exit Utility menu.
Explanation
The setting parameter can be initializing and restore it to the factory setting. This function is very useful for
cancelling all the setting or restarting executes measurement function. The factory setting can see as the
following table.
Item
Instruments.uni-trend.com
Default Setting
UTE9800+ Series Smart Digital Power Meter
42 / 55
Advertisement
Table of Contents
