Casio 3554 Operation Manual page 90

Updating the Watch's
Software Version
Updating (upgrading) the watch software
improves function and watch operation.
Makes sure that you keep watch software
updated to the latest version.
Updating Watch Software
●
You should use the CASIO WATCHES phone
app to update (upgrade) your watch's
software.
A notification on the CASIO WATCHES phone
app screen lets you know when a software
update is available. Follow the instructions on
the screen to update the software.
Check the connection
Make sure the symbol is shown on the
e
●
watch display when you perform the
procedure below. If is not displayed,
e
refer to the information at the link below.
Connecting with a Phone Paired
l
With the Watch
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Tap the "My Watch" tab.
3. Y
Select "GPR-H1000" and tap it.
4. Y
Perform the operation shown on the
screen to update the watch software
version.
Important!
Ensure the Watch Mode timekeeping
●
screen is displayed when updating the
watch software.
Software updating can take up to 30
●
minutes.
It is recommended that you have the
●
watch connected to its charging cable
and charging before you start a
software update operation.
If you are unable to update the
●
software for some reason, visit the
website below.
https://support.casio.com/wat/app/3554/en/
Watch Operation Guide 3554
Resetting Watch Settings
This section explains how to return the watch
time, date, and other settings, as well as the
log to their initial factory defaults.
Important!
Once you perform a reset operation,
●
you cannot restore pre-reset settings.
Reset the watch settings is not
●
possible under the conditions
described below.
While the battery level indicator is
ー
1.
Display the current time screen.
Watch Mode
l
2.
Hold down (A) for at least two seconds.
This enters the Control Mode.
3.
Use (A) and (D) to select [SETTING].
4.
Press (C).
This displays the setting menu screen.
Pointer
5.
Use (A) and (D) to move the pointer to
[GENERAL SETTINGS].
6.
Press (C).
This displays the GENERAL SETTINGS
screen.
7.
Use (A) and (D) to move the pointer to
[RESET].
8.
Press (C).
or lower
9.
Use (A) and (D) to move the pointer to
[YES].
To stop the reset operation, move the
●
pointer to [NO].
10.
Press (C).
After the reset operation is complete, the
watch will return to the current time
screen. The reset operation is complete
when [AC] appears in the lower right
corner of the display.
11.
Press (A) to clear [AC] from the display.
Note
Resetting the watch will also delete
●
information for pairing the watch with a
phone, and unpair them.
90