Casio 3554 Operation Manual page 84

Configuring the Auto Light
Setting
1.
Display the current time screen.
Watch Mode
l
2.
Hold down (A) for at least two seconds.
This enters the Control Mode.
3.
Use (A) and (D) to select [SETTING].
4.
Press (C).
This displays the setting menu screen.
Pointer
5.
Use (A) and (D) to move the pointer to
[GENERAL SETTINGS].
6.
Press (C).
This displays the GENERAL SETTINGS
screen.
7.
Use (A) and (D) to move the pointer to
[LIGHT].
8.
Press (C).
9.
Use (A) and (D) to move the pointer to
[AUTO LIGHT].
10.
Press (C).
11.
Use (A) and (D) to move the pointer to
[OFF] (disabled) or [ON] (enabled).
12.
Press (C) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the auto light setting screen re-
appears.
13.
Hold down (E) for at least one second to
return to the current time screen.
Watch Operation Guide 3554
Specifying the Illumination
Duration
You can select either 1.5 seconds or five
seconds as the illumination duration.
The illumination duration setting is applied as
described below.
Illumination triggered by a button operation
●
Auto Light illumination
●
Illumination that is triggered by Auto Lap, a
●
notification, an alarm or some other
notification operation
1.
Display the current time screen.
Watch Mode
l
2.
Hold down (A) for at least two seconds.
This enters the Control Mode.
3.
Use (A) and (D) to select [SETTING].
4.
Press (C).
This displays the setting menu screen.
Pointer
5.
Use (A) and (D) to move the pointer to
[GENERAL SETTINGS].
6.
Press (C).
This displays the GENERAL SETTINGS
screen.
7.
Use (A) and (D) to move the pointer to
[LIGHT].
8.
Press (C).
9.
Use (A) and (D) to move the pointer to
[DURATION].
10.
Press (C).
11.
Use (A) and (D) to select an illumination
duration.
[1.5s] 1.5-second illumination
[5.0s] 5-second illumination
12.
Press (C) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the illumination duration setting
screen re-appears.
13.
Hold down (E) for at least one second to
return to the current time screen.
Note
If you do not perform any operation for
●
two or three minutes while the setting
screen is displayed, the watch
automatically returns to the current
time screen.
84