Casio 3554 Operation Manual page 101

Pedometer
Q1
Displayed step count is not correct.
While the watch is on your wrist, the
pedometer may detect non-step movements
and count them as steps.
Counting Steps
l
Also, step count problems can also be caused
by how the watch is being worn and abnormal
arm movement while walking.
Causes of Incorrect Step Count
l
Q2
The step count does not increase.
To prevent erroneous counting, the count
display does not increase immediately after
you start walking.
Q3
[ERROR] appears when using the
pedometer.
[ERROR] (error) is displayed when sensor
operation is disabled because of sensor or
internal circuitry malfunction.
If the indicator remains on the display for more
than three minutes or if it frequently appears,
it could indicate a faulty sensor.
Contact a CASIO service center or your
original retailer.
Watch Operation Guide 3554
Tide Function
Q1
There are errors in the tide
information.
Since the high tide and low tide times and tide
levels of the Tide Graph are calculated based
on past data, the calculated data may be
different from actual tide information.
Also note that the degree of the error can be
affected by terrain, weather, and other
conditions. Use the tide information of this
watch for reference only.
Be sure to check accurate tide forecast
information issued by various organizations,
and do not use the tide information of this
watch to determine tide levels used for
navigation or any other purpose where there
is the risk of danger.
Alarm
Q1
There is no sound and/or vibration
operation performed for alarms.
Is the watch's battery charged?
Charge the watch until the battery is
sufficiently recharged.
Charging the Watch
l
Is alarm sound and/or vibration enabled?
Enable the alarm.
Turning Off an Alarm
l
Other
Q1
I can't find the information I need
here.
Visit the website below.
https://world.casio.com/support/
101