Casio 3554 Operation Manual page 64

Note
To exit the timer setting operation at
●
any point, press (E).
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Using the Timer
1.
Display the current time screen.
Watch Mode
l
2.
Use (A) and (D) to select [TIMER].
3.
Press (C).
This displays the TIMER screen.
4.
Use the operations below to perform a
timer operation.
Start
C
(Countdown starts)
Pause
C
Resume
C
(Time up)
The watch performs a sound and/or
●
vibration operation for 10 seconds
when the end of the countdown is
reached.
You can reset a paused countdown to
●
its start time, by pressing (E).
5.
Press any button to stop the sound and/or
vibration operation.
Watch Operation Guide 3554
You can use the pedometer to keep track of
your step count while walking, running,
engaging in your normal daily activities, etc.
Counting Steps
If you are wearing the watch correctly, the
pedometer counts your steps as you walk, run,
or engage in your normal daily activities.
Important!
Since this watch's pedometer is a
●
wrist-worn device, it may detect non-
step movements and count them as
steps. Also, abnormal arm movements
while walking may cause a miss count
of steps.
Getting Ready
●
To enable the most accurate step count, wear
the watch with the face on the outside of your
wrist and tighten the band securely. A loose
band may make it impossible to obtain correct
measurement.
YES
Counting Steps
●
The pedometer will start counting your steps
when you start walking.
Pedometer
NO
To check the step count
●
You can check your step count on the watch's
current time screen, with the Life Log function
or with the CASIO WATCHES phone app.
Specifying a Watch Face
l
Viewing Life Log Data
l
Note
The step count can show a value up to
●
99,999 steps. [- - - - -] is displayed when
the step count exceeds 99,999.
To avoid miscounting of non-walking
●
movements, the step count is not
displayed immediately after you start
moving.
The step count is reset to zero at
●
midnight each day.
The watch can store up to three days
●
of step counts.
Step count results are transferred to
●
the CASIO WATCHES phone app
when the watch is connected to the
app or when the app is started up.
You can also use the CASIO
●
WATCHES phone app to specify a
daily step target.
Specifying a Daily Step Count
l
Target
64