Casio 3554 Operation Manual page 78

Interval timer screen
①
②
Total measurement time
A
Interval timer value
B
Number of repeats
C
Current heart rate
D
Note
In the case of INTERVAL TIMER,
●
Screen 1 shows the interval timer
screen.
Configuring Settings
Check the connection
Make sure the symbol is shown on the
e
●
watch display when you perform the
procedure below. If is not displayed,
e
refer to the information at the link below.
Connecting with a Phone Paired
l
With the Watch
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Tap the "My Watch" tab.
3. Y
Select "GPR-H1000" and tap it.
4. Y
Select the setting you want to change
and then perform the operation shown on
the screen.
Watch Operation Guide 3554
Specifying Checkpoints
Along a Training Course
(Altitude Navigation)
③
You can use the CASIO WATCHES phone
app to specify checkpoints along a running
④
course. You can use the watch to check the
altitude differential between a checkpoint and
your current location.
Configuring Activity Measurement Display
l
Settings
Important!
Note that you cannot specify
●
checkpoints using watch operations.
Use the CASIO WATCHES phone app
to configure settings.
Check the connection
Make sure the
●
watch display when you perform the
procedure below. If
refer to the information at the link below.
Connecting with a Phone Paired
l
With the Watch
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Tap the "My Watch" tab.
3. Y
Select "GPR-H1000" and tap it.
4. Y
Select the setting you want to change
and then perform the operation shown on
the screen.
symbol is shown on the
e
is not displayed,
e
Enabling the Wrist Sensor
You can use the CASIO WATCHES phone
app to enable or disable the wrist sensor so
the watch can detect whether or not it is
attached to your wrist.
The wrist sensor is enabled under initial
●
factory default settings.
Important!
You cannot change the wrist sensor
●
setting using watch operations. Use
the CASIO WATCHES phone app to
configure settings.
Check the connection
Make sure the symbol is shown on the
e
●
watch display when you perform the
procedure below. If is not displayed,
e
refer to the information at the link below.
Connecting with a Phone Paired
l
With the Watch
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Tap the "My Watch" tab.
3. Y
Select "GPR-H1000" and tap it.
4. Y
Tap "Watch Settings".
5. Y
Tap "Find Worn Watch".
6. Y
Enable "On".
78