Note
If you do not perform any operation for
●
two or three minutes while the Almanac
screen is displayed, the watch
automatically returns to the current
time screen.
Interpreting the Moon Graph and Moon
Age Indicator
Moon phase
Moon age
0.0 to 0.9
New Moon
28.7 to 29.8
1.0 to 2.7
2.8 to 4.6
4.7 to 6.4
First Quarter 6.5 to 8.3
8.4 to 10.1
10.2 to 12.0
12.1 to 13.8
Full Moon
13.9 to 15.7
15.8 to 17.5
17.6 to 19.4
19.5 to 21.2
Last Quarter 21.3 to 23.1
23.2 to 24.9
25.0 to 26.8
26.9 to 28.6
The indicators in the above table show
●
approximate phase forms when facing
south to look up at the Moon in the Northern
Hemisphere.
They are intended only to indicate whether
the Moon's left or right side is darkened, and
the Moon's actual appearance may be
different. Also, in the Southern Hemisphere
or near the equator, the Moon will appear in
the northern sky, so the light and dark
portions of the Moon will be opposite those
shown by the watch's indicator.
Watch Operation Guide 3554
Specifying a Location to
Look Up Its Sunrise/Sunset
Times and Moon Age
1.
Display the current time screen.
Watch Mode
l
2.
Use (A) and (D) to select [ALMANAC].
This
indicator:
3.
Press (C).
4.
Hold down (A) for at least two seconds.
This displays the almanac setting screen.
5.
Press (C).
6.
Use (A) and (D) to move the pointer to the
location whose almanac you want to view.
[LATEST
POSITION]
[SAME AS TIDE
SETTINGS]
Use any one of the sources
below to configure the
latest location setting.
Location information
●
obtained by GPS signal
reception.
Location information
●
obtained by Bluetooth
connection.
Manually configured
●
Home City setting.
Specifies the same location
as the Tide Graph setting.
7.
Press (C) to complete the setting
operation.
After the setting operation is complete, a
checkmark appears for a few seconds,
and then the almanac setting screen re-
appears.
Note
If you do not perform any operation for
●
two or three minutes while the Almanac
screen is displayed, the watch
automatically returns to the current
time screen.
50