Casio 3554 Operation Manual page 67

Cycling Between Notification
Cut-in Displays
You can use this procedure to specify either
simple display or full display of notification cut-
in.
1.
Display the current time screen.
Watch Mode
l
2.
Hold down (A) for at least two seconds.
This enters the Control Mode.
3.
Use (A) and (D) to select [SETTING].
4.
Press (C).
This displays the setting menu screen.
Pointer
5.
Use (A) and (D) to move the pointer to
[GENERAL SETTINGS].
6.
Press (C).
This displays the GENERAL SETTINGS
screen.
7.
Use (A) and (D) to move the pointer to
[NOTIFICATION PATTERN].
8.
Press (C).
9.
Use (A) and (D) to change the display type
setting.
[SIMPLE] Simple display
[FULL] Full display
Watch Operation Guide 3554
10.
Press (C) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the GENERAL SETTINGS
screen re-appears.
11.
Hold down (E) for at least one second to
return to the current time screen.
Note
If you do not perform any operation for
●
two or three minutes while the setting
screen is displayed, the watch
automatically returns to the current
time screen.
Deleting a Notification
Deleting a Particular Notification
1.
Display the current time screen.
Watch Mode
l
2.
Use (A) and (D) to select
[NOTIFICATION].
3.
Press (C).
This displays the notification list.
4.
Use (A) and (D) to move the pointer to the
title of the notification you want to delete.
5.
Press (C).
This displays the details of the notification.
6.
Hold down (A) for at least two seconds.
This displays the data delete screen.
Pointer
7.
Use (A) and (D) to move the pointer to
[YES].
To cancel data deletion, move the
●
pointer to [NO].
8.
Press (C).
After the data delete operation is
complete, a check mark appears for a few
seconds, and then the notification list
screen re-appears.
67