Related Manuals for Casio 3536
Summary of Contents for Casio 3536
-
Page 1: Table Of Contents
MA2308-EA © 2023 CASIO COMPUTER CO., LTD. Watch Operation Guide 3536 Contents Stopwatch Measuring Elapsed Time Precautions Measuring a Split Time Operating Precautions Timing the First and Second Place Finishers User Maintenance Timer Battery Replacement Setting the Time Before Getting Started... -
Page 2: Precautions
Do not operate the crown or buttons while ー retailer or to an authorized CASIO service Example of Daily Use your watch is submersed in water or wet. center. Hand washing, rain Avoid wearing your watch while in the ー ... - Page 3 Leather Band ● Electrostatic charge can cause the display ● Note that CASIO Computer Co., Ltd. to go blank momentarily or cause a rainbow Allowing your watch to remain in contact ● assumes no responsibility for any effect on the display.
-
Page 4: User Maintenance
CASIO service indicating possible damage is noticed in a and a mild neutral detergent, or with soapy center. -
Page 5: Before Getting Started
Watch Operation Guide 3536 General Guide Indicators Before Getting Started... ① ② This section provides an overview of the watch and introduces convenient ways it can be ③ used. ① ③ Watch Features ● ④ ⑤ World Time ● World Time displays the current time in any ②... -
Page 6: Navigating Between Modes
Watch Operation Guide 3536 Specifying the Illumination Duration Navigating Between Modes ● Viewing the Face in the Dark You can select either 1.5 seconds or three Press (C) to cycle between modes. The watch has a light that illuminates the face seconds as the illumination duration. -
Page 7: Time Adjustment
Watch Operation Guide 3536 Configuring the Summer Time Setting ● Time Adjustment Use (C) to display the setting you want to If you are in an area that observes summer change. time, you can also configure a summer time Each press of (C) cycles through setting. -
Page 8: World Time
Watch Operation Guide 3536 Switching between 12-hour and 24- ● Setting the World Time City World Time hour Timekeeping You can specify either 12-hour format or 24- Use the procedure in this section to select a hour format for the time display. -
Page 9: Alarm
Watch Operation Guide 3536 Testing the alarm ● Alarm Hold down (A) for at least one second. In the Alarm Mode, hold down (D) to sound the Release the button when the hour setting alarm. starts to flash. The watch will beep when the alarm time is To stop the alarm ●... -
Page 10: Enabling The Hourly Time Signal
Watch Operation Guide 3536 Enabling the Hourly Time Stopwatch Enter the Alarm Mode. Signal Navigating Between Modes The stopwatch measures elapsed time in units Use (D) to scroll through the alarm ([1] to Enter the Alarm Mode. of 1/100 seconds up to 59 minutes, 59.99... -
Page 11: Measuring A Split Time
Watch Operation Guide 3536 Measuring a Split Time Timing the First and Second Timer Place Finishers Enter the Stopwatch Mode. The timer counts down from a start time Navigating Between Modes Enter the Stopwatch Mode. specified by you. A beeper sounds when the Navigating Between Modes end of the countdown is reached. -
Page 12: Using The Timer
Watch Operation Guide 3536 Other Settings Other Information Note While the setting is being configured, ● This section explains other watch settings you This section provides non-operational the watch will exit the setting operation can configure. information you also need to know. Refer to automatically after about two or three this information as required. -
Page 13: Specifications
Watch Operation Guide 3536 Troubleshooting Timer : City Time City Name code Zone Measuring unit: 1 second St. John’s -3.5 Countdown range: 24 hours Rio de Janeiro Time setting unit: 1 minute World Time 10-second beeper when the end of the...