Enter Setup
Set the decode session timeout to 1,500ms:
1.
2.
3.
4.
5.
Scanning Interval (Continuous Mode)
This parameter sets the duration the scanner will stop decoding an image before restarting scanning after a good read.
** Exit Setup
Decode Session Timeout
Scan the Enter Setup barcode.
Scan the Decode Session Timeout barcode.
Scan the numeric barcodes "1", "5", "0" and "0" from the "Digit Barcodes" section in Appendix.
Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
Scan the Exit Setup barcode.
Scanning Interval (Continuous Mode)
38