Table of Contents
Advertisement
Introduction
This manual provides installation, optics, electrical specifications as well as detailed instructions for setting up and using the
NLS-FM530 PRO fixed mount barcode scanner (hereinafter referred to as "the FM530 PRO" or "the scanner").
This guide provides programming instructions for the FM530 PRO. Users can configure the FM530 PRO by scanning the
programming barcodes included in this manual.
The FM530 PRO has been properly configured for most applications and can be put into use without further configuration.
Users may check Appendix: Factory Defaults Table for reference.
Chapter Description
²
Chapter 1, Getting Started
²
Chapter 2, Installation
²
Chapter 3, Optics
²
Chapter 4 Electrical Specifications
²
Chapter 5 External Reference Circuit
Chapter 6, EasySet
²
²
Chapter 7 Configuration
Chapter 8 Communication Interface
²
²
Chapter 9, System Settings
Chapter 10, Symbologies
²
²
Chapter 11, Data Formatter
²
Chapter 12, Prefix & Suffix
²
Chapter 13 Programming Commands
1
Preface
: Gives a general description of the FM530 PRO.
: Describes how to install the scanner, including installation information,
connector, cable, ESD, and environmental considerations.
: Provides parameters for optics and illumination.
: Includes the electrical characteristics for the scanner and timing sequences.
: Provide external driver circuit diagrams.
: Introduces a useful tool you can use to set up the FM530 PRO.
: Introduces the use of programming barcodes and product information query.
: Describes how to configure RS-232 communication parameters.
: Describes how to configure general parameters of the FM530 PRO.
: Lists all compatible symbologies and describes how to configure the relevant
parameters.
: Explains how to customize scanned data with the advanced data formatter.
: Describes how to use prefix and suffix to customize scanned data.
: Introduces how to configure the FM530 PRO by serial commands sent from
Advertisement
Table of Contents
