Table of Contents
Advertisement
Maintenance
²
The scan window should be kept clean.
²
Do not scratch the scan window.
²
Use the soft cloth to clean the window, such as eyeglass cleaning cloth.
²
Do not spray any liquid on the scan window.
²
Do not use any detergent to clean other parts of the device except for water.
²
Please remove the protective film before using the device.
Note: The warranty DOES NOT cover damages caused by inappropriate care and maintenance.
Caution
1. Protect the lens of the sensor from contamination.
2. Follow the regulations below, otherwise it may cause harmful exposure to radiation.
-The aiming LED can be programmed off first when there is no need to adjust the position.
-Do not disassemble the device under any circumstances.
-Only the manufacturer can repair the faulty sensor.
-If the fault can not be removed, please stop the device and prevent it from being accidentally turned on.
13
Advertisement
Table of Contents
