Table of Contents
Advertisement
Enter Setup
Enable Level Output
Level output is enabled after a successful or failed decode. The configuration format is LCAATCmSnF.
m=1: it indicates the scanner produces high/low level after a good read.
m=0: it indicates the scanner doesn't produce high/low level after a good read.
n=1: it indicates the scanner produces high/low level after a failed read.
n=0: it indicates the scanner doesn't produce high/low level after a failed read.
Output Level After a Good Read
Output Level After a Good or Failed Read
** Exit Setup
Output Level After a Failed Read
Do Not Output Level
58
Advertisement
Table of Contents
