Enter Setup
Set the Good Read LED duration to 800ms:
1.
2.
3.
4.
5.
Power On Beep
The scanner can be programmed to beep when it is powered on. Scan the Off barcode if you do not want a power on beep.
On
Good Read Beep
Scanning the Off barcode can turn off the beep that indicates successful decode; scanning the On barcode can turn it back
on.
On
** Exit Setup
Scan the Enter Setup barcode.
Scan the Custom barcode.
Scan the numeric barcodes "8", "0" and "0" from the "Digit Barcodes" section in Appendix.
Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
Scan the Exit Setup barcode.
Off
Off
48