Enter Setup
Barcode Data Length
The scanner can only scan barcodes within specific length. You may set the barcode data length with a command.
LCAGnLmMfFsStT (n: Specify the symbology type; m=0: Specify the barcode data length, f, s or t; m=1: Specify the barcode
data length, f~s and t)
"f", "s" and "t" indicate the value of the barcode data length (f≤63, s≤63, t≤63, f≤s).
Interleaved 2 of 5 Barcode Length
Code 39 Barcode Length
Code 128 Barcode Length
Codabar Barcode Length
Code 93 Barcode Length
65
** Exit Setup