Table of Contents
Advertisement
Introduction
This manual provides installation, optics, electrical specifications as well as detailed instructions for setting up and using the
NLS-FM510 series fixed mount barcode scanner (hereinafter referred to as "the FM510" or "the scanner").
This guide provides programming instructions for the FM510. Users can configure the FM510 by scanning the programming
barcodes included in this manual.
The FM510 has been properly configured for most applications and can be put into use without further configuration. Users
may check Appendix: Factory Defaults Table for reference.
Chapter Description
Chapter 1, Getting Started
Chapter 2, Installation
Chapter 3, Optics
Chapter 4 Electrical Specifications
Chapter 5 External Reference Circuit
Chapter 6, EasySet
Chapter 7 Configuration
Chapter 8 Communication Interface
Chapter 9, System Settings
Chapter 10, Symbologies
Chapter 11, Data Formatter
Chapter 12, Prefix & Suffix
Chapter 13 Programming Commands
1
Preface
: Gives a general description of the FM510.
: Describes how to install the scanner, including installation information,
connector, cable, ESD, and environmental considerations.
: Provides parameters for optics and illumination.
: Includes the electrical characteristics for the scanner and timing sequences.
: Provide external driver circuit diagrams.
: Introduces a useful tool you can use to set up the FM510.
: Introduces the use of programming barcodes and product information query.
: Describes how to configure RS-232 communication parameters.
: Describes how to configure general parameters of the FM510.
: Lists all compatible symbologies and describes how to configure the relevant
parameters.
: Explains how to customize scanned data with the advanced data formatter.
: Describes how to use prefix and suffix to customize scanned data.
: Introduces how to configure the FM510 by serial commands sent from the
Advertisement
Table of Contents
