Drain The Engine Oil - Segway SGW500F-A7 Owner's Manual

MAINTENANCE,STORAGE AND TRANSPORTATION

DRAIN THE ENGINE OIL

Bolt
1 2
The engine oil drain plug is located under the maintenance cover
plate of the frame floor at the bottom of the vehicle.
1. Put the vehicle on the flat level surface.
2. Start the engine, let it warm up at idle for 2 to 3 minutes.
3. Turn off the engine.
4. Remove the fixing screws of the filter inspection cover and
open the filter inspection cover.
5. Remove the oil drain plug
engine oil drains out completely.
Hot oil may burn the skin. Do not let the oil contact skin.
6. Put a new sealing washer onto the drain plug and reinstall the
drain plug.
Torque specifications ：
Torque
Filter inspection cover
Oil drain plug：16-20N.m(11.8-14.8ft·lb)
4
2
3
Oil drain plug
3
and gasket, until the waste
3
NOTICE
98
1
Gasket
4