Delivery Set; Technical Specifications - Vitek VT-1185 Manual Instruction

Hide thumbs Also See for VT-1185:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 9
Stains on the inner surface of the thermopot
The inner surface of the metal flask may change
its color under the influence of different water im-
purities.
You can remove the stains with citric acid or vin-
egar.
To remove the flavour of citric acid or vinegar,
boil water and pour it out.
Repeat this procedure until the smell and taste
vanish completely.
Descaling
Scale, appearing inside the metal tank (10),
causes the heating element overheating and
malfunction. Burning of the heating element
caused by the scale in the thermopot is not
covered by warranty.
To remove the scale fill the thermopot with
a mixture of one part ordinary vinegar and
two parts water (for 5 l of the solution: 3.5 l
of water and 1.5 l of table vinegar) up to the
maximal level «FULL» (6). You can use citric
acid instead of vinegar at 20 g per 1 l of water.
Insert the power cord (16) connector into the
socket (15) on the thermopot body, and the
power cord (16) plug into the mains socket.
Press the «CLEAN | Очистка» button (25),
the power (18) and clean mode (20) indi-
cators will appear. The unit will start boiling
water. Then the cleaning indicator will flash,
which means that the cleaning is completed,
unplug the power cord (16) from the socket
and leave the thermopot with the vinegar solu-
tion overnight.
In the morning pour out the vinegar solution,
fill the thermopot with clean water up to the
maximal level, boil it and pour out the water.
You can use special detergents for electric
kettles to remove scale, strictly following the
instructions on the detergent usage.
If necessary, perform the cleaning procedure
several times.
STORAGE
Before taking the thermopot away for long stor-
age, unplug it, let the unit cool down and pour
out the remaining water.
Clean the thermopot.
Keep the thermopot out of reach of children and
disabled persons.

DELIVERY SET

Thermopot – 1 pc.
Power cord – 1 pc.
Instruction manual – 1 pc.
Warranty certificate – 1 pcs.

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V ~ 50 Hz
Rated input power: 750-890 W
Maximal water capacity: 5,0 L
RECYCLING
For environment protection do not throw out the
unit and the batteries (if included), do not discard
the unit and the batteries with usual household
waste after the service life expiration; apply to
specialized centers for further recycling.
The waste generated during the disposal of the
unit is subject to mandatory collection and con-
sequent disposal in the prescribed manner.
For further information about recycling of this
product apply to a local municipal administration,
a disposal service or to the shop where you pur-
chased this product.
The manufacturer preserves the right to change
design, structure and specifications not affecting
general principles of the unit operation without a
preliminary notification due to which insignificant
differences between the manual and product may
be observed. If the user reveals such differences,
please report them via e-mail info@vitek.ru for
receipt of an updated manual.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC Directive
2014/30/EU and to the Low Voltage
Directive 2014/35/EU.
13
ENGLISH

Advertisement

Table of Contents
loading

Table of Contents