Adjustment - Compak K3 User Manual

8.1 GRINDER SET UP
8.1.1 Place the hopper (
regulator ( ) and make sure the bean trap
( ) is in the closed position (Fig. 1).
Fig. 1
8.1.2 Lock the hopper (
phillips head screw driver to gently tighten
the hopper security screw making it match
to the hole at the bean hopper collar ( ) (Fig.
2).
Fig. 2
K09652H00 | PROC-CAL/002/03 USER MANUAL | V. 29/06/20023
) on the grind
) in place using a
8.

ADJUSTMENT

8.1.3 Remove the hopper lid (
hopper with coffee (
) (Fig. 3).
on the hopper (
Fig. 3
8.1.4 Plug in the grinder, and press the main
) to ON position, and open
power switch (
the bean trap ( ) to allow coffee to pass into
the grind chamber (Fig. 4).
Fig. 4
), fill the
), and replace the lid
11