Table of Contents
Advertisement
8.
ADJUSTMENT
8.1.
GRINDER SET UP
Place the hopper (
) on the grind regulator
(
) and make sure the bean trap (
the closed position (Fig. 1).
Fig. 1
Lock the hopper (
) in place using a Phillips
head screw driver to gently tighten the
hopper security screw making it match to the
hole at the bean hopper collar ( ) (Fig. 2).
Fig. 2
12
) is in
K09657H02 | PROC-CAL/002/03 USER MANUAL | V. 11/07/2023
Remove the hopper lid (
with coffee (
), and replace the lid on the
hopper (
) (Fig. 3).
Fig. 3
Plug in the grinder, and press the main power
switch ( ) to ON position, and open the
bean trap ( ) to allow coffee to pass into the
grind chamber (Fig. 4).
Fig. 4
), fill the hopper
Advertisement
Table of Contents
