Adjustment - Compak BOLT User Manual

8.

ADJUSTMENT

8.1. GRINDER SET UP
Place the hopper ( ) on the grind regulator
( ) and make sure the bean trap (
the closed position (Fig. 1).
Fig. 1
Lock the hopper ( ) in place using a phillips
head screw driver to gently tighten the
hopper security screw making it match to the
hole at the bean hopper collar ( ) (Fig. 2).
Fig. 2
10
Remove the hopper lid (
with coffee (
) is in
hopper (
Plug in the grinder, and press the main power
switch ( ) to ON position, and open the
bean trap ( ) to allow coffee to pass into the
grind chamber (Fig. 4).
K09650H00 | PROC-CAL/002/03 USER MANUAL | V. 06/04/2022
), fill the hopper
), and replace the lid on the
) (Fig. 3).
Fig. 3
Fig. 4