Wi-Fi Setup - Crestron TSS-470E Product Manual

Tap LOGIN to log into the touch screen using the six-digit PIN. This selection is only available after
l
entering all six digits of the PIN.
If the login is successful, the lock icons are cleared from the Device Settings screen and the selections
can be accessed. The current session times out after three minutes of inactivity, after which the PIN
must be reentered.
For more information on configuring a device settings admin PIN, refer to
page 74.

Wi-Fi Setup

Tap Wi-Fi Setup on the Device Settings screen to display the Wi-Fi Setup screen.
Use the Wi-Fi Setup screen to view the Wi-Fi network SSID, IP and MAC addresses, subnet mask
address, default router address, primary and secondary DNS addresses, and various details about the
Wi-Fi connection. A status bar is provided to indicate the status of the Wi-Fi connection (Connected or
Not Connected).
NOTE: The touch screen Ethernet adapter must be turned off before a Wi-Fi connection can be
established.
Turn on the Wi-Fi Enabled toggle to turn on the Wi-Fi adapter. If the Wi-Fi Enabled toggle is turned off,
Wi-Fi will not function and an Ethernet connection can be established.
Tap the Home button at the top of the screen at any time to return to the Device Settings screen.
98 • TSS-470E
Device Settings Admin PIN on
Product Manual — Doc. 9347A