Local Configuration - Crestron TSS-470E Product Manual

Local Configuration

Certain touch screen settings may be monitored and configured using its local configuration interface.
The interface can be accessed as described in
The Device Settings screen is displayed.
The Device Settings screen provides the following menu selections:
Tap Info to display information about the touch screen and its network connection.
l
Tap Exit to exit the local setup screens and to return to the application running on the touch
l
screen.
Tap Reboot to restart the touch screen. Tap OK when prompted by the touch screen to confirm
l
the restart.
Tap Restore to restore the touch screen to its factory default settings. Tap OK when prompted by
l
the touch screen to confirm the restore.
CAUTION: Performing a restore returns all touch screen settings to their default values
(except for application settings) but retains any Wi-Fi access points (WAPs) that were
previously added. To perform a factory restore that also removes any previously-added
WAPs, refer to
Additionally, selections for configuring a Wi-Fi® network connection or Ethernet connection are
provided. Each selection is described in the following sections.
96 • TSS-470E
Perform a Factory Restore on page
Initial Setup on page
119.
47.
Product Manual — Doc. 9347A