Crestron TSS-470E Product Manual page 91

The following Work Hours settings are provided:
Power Mode: Use the drop-down menu to set the power mode settings for the touch screen
display:
Always On: The touch screen display is always turned on and will not enter standby timeout
l
mode regardless of scheduled work hours.
Work Hours Based: The touch screen display is turned on only during scheduled work hours
l
and be placed in standby timeout mode during nonworking hours. The touch screen display
can be tapped to wake it from standby timeout mode.
Standby Timeout: If Work Hours Based is selected for Standby, enter a standby timeout duration
l
(0‒120 minutes) for the touch screen. If the touch screen display is tapped during nonworking
hours, it will remain on for the specified duration before returning to standby timeout mode.
Select "0" to always have the touch screen display turned on when using work hours.
NOTE: Work hours also control when all-day reservations will be declined if the decline for no show
functionality has been configured for the touch screen. It is recommended to set the work hours
On Time to reflect when most users in your organization typically start their work day.
The following settings may be also configured for each day of the week listed in the corresponding Day
column.
Enable: Turn on the toggle to use power mode controls for the chosen day of the week. The touch
l
screen display does not turn on for any day that is not selected by turning on the Enable toggle.
On Time: Enter the time (in 24-hour format) when the connected touch screen display is turned on
l
automatically for the chosen day of the week. The On Time value is also used to set when all day
reservations will begin.
Off Time: Enter the time (in 24-hour format) when the connected touch screen display is turned
l
off automatically for the chosen day of the week. The Off Time value is also used to set when all
day reservations will end.
Product Manual — Doc. 9347A TSS-470E • 87