Crestron TSS-470E Product Manual page 30

3. Use a level and masking tape to attach the included rear housing template to the surface at the
chosen location. Ensure the template is level before proceeding.
Install Raceway
Raceway (not included) can be installed on a nearby smooth surface to conceal cables running to the
touch screen from the floor, ceiling, or an adjacent wall, pillar, or mullion.
CAUTION: Raceway must be installed prior to installing the MSMK, and the location of the raceway
cannot be changed once the MSMK is installed.
To install raceway for use with the touch screen:
1. Determine whether the raceway will enter the MSMK from the top, bottom, left, or right side.
2. Create a raceway cutout by removing the appropriate perforated strip from the rear housing
template.
For example, if the raceway will enter the MSMK from the left side, remove the left perforated
strip from the template.
26 • TSS-470E Product Manual — Doc. 9347A