Page 2
Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography.
7” Room Scheduling Touch Screen: TSW-730 Access the Setup Screens The main setup menu is the starting point for configuring the TSW-730 touch screen ® from Crestron NOTE: If no project has been loaded or if an invalid project has been loaded, the touch screen defaults to the main setup menu.
Page 6
About button that provides information about the touch screen and a Save & Exit button. The functions of each are detailed in the next section of this guide. 2 • 7” Room Scheduling Touch Screen: TSW-730 Configuration Guide – DOC. 7414B...
To edit the Static IP Address, Static Subnet Mask, Static Default Router, Preferred DNS or Alternate Preferred DNS, touch the button directly under the label for the entry to edit. The on-screen numeric keypad opens. Configuration Guide – DOC. 7414B 7” Room Scheduling Touch Screen: TSW-730 • 3...
Online indicator. To add or edit an entry, touch the Add/Edit button to its left. The “Ethernet Setup – Edit IP Table Entry” screen is displayed. 4 • 7” Room Scheduling Touch Screen: TSW-730 Configuration Guide – DOC. 7414B...
Page 9
Touch Save to save a new entry to return to the “Ethernet Setup – Edit IP Table Entry” screen. Touch the field below IP Address/Hostname to display the on-screen keyboard. Configuration Guide – DOC. 7414B 7” Room Scheduling Touch Screen: TSW-730 • 5...
Master Volume and Media Volume, as well as a control for playing a test .wav file. The Media Volume controls adjust H.264 streaming media level in relation to the Master Volume controls. 6 • 7” Room Scheduling Touch Screen: TSW-730 Configuration Guide – DOC. 7414B...
“Standby Timeout” Screen The “Standby Timeout” screen provides controls to adjust standby timeout from 0 to 120 minutes. Touch to return to the main setup menu. Configuration Guide – DOC. 7414B 7” Room Scheduling Touch Screen: TSW-730 • 7...
When a button is pressed, its corresponding indication on the screen lights. Touch to return to the “Diagnostics” menu. Touch Test On the “Diagnostics” menu, touch Touch Test to display the touch test screen. 8 • 7” Room Scheduling Touch Screen: TSW-730 Configuration Guide – DOC. 7414B...
Page 13
“Diagnostics – Sensors” Screen The “Diagnostics - Sensors” screen can be used to view the status of any sensors attached to the TSW-730 or its built-in proximity sensor. This screen also provides controls for adjusting the proximity sensor strength. Configuration Guide – DOC. 7414B...
Page 14
Touch to return to the “Diagnostics” menu. Rava Test On the “Diagnostics” menu, touch Rava Test to display the “Diagnostics – Rava” screen. “Diagnostics - Rava” Screen 10 • 7” Room Scheduling Touch Screen: TSW-730 Configuration Guide – DOC. 7414B...
The “Diagnostics - Rava” screen provides controls for testing the use of Crestron’s Rava™ SIP Intercom with the TSW-730. They can be used to test projects and settings. If the intercom works but the project does not, there is an issue with the project;...
Page 16
Crestron Electronics, Inc. Configuration Guide – DOC. 7414B (2034623) 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON 10.13 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.
Need help?
Do you have a question about the TSW-730 and is the answer not in the manual?
Questions and answers