Table of Contents
Advertisement
MIDI Specifications
MIDI Program Changes
Your UltraViolet pedal contains 300 preset locations, numbered
sequentially from 0-299� Because MIDI Program Change messages have
a maximum number of 128 (0-127), the presets are grouped into three
MIDI patch banks�
MIDI BANK
MIDI BANK 0 = PRESETS 0-127
MIDI BANK 1 = PRESETS 128-255
MIDI BANK 2 = PRESETS 256-299
MIDI PROGRAM CHANGE
MIDI PROGRAM
CHANGE 0
MIDI PROGRAM
CHANGE 1
MIDI PROGRAM
CHANGE 2
MIDI PROGRAM
CHANGE 3
MIDI PROGRAM
CHANGE 127
NOTE: Some MIDI applications and controllers start with MIDI Program
Change 1 instead of 0� In these setups, add one to each MIDI Program
Change location above�
The UltraViolet pedal always powers up in MIDI Patch Bank 0, so if you
plan to stay within the first 127 preset locations, simply send a standard
MIDI Program Change message to load a preset�
If you will be using MIDI Banks 1 and/or 2, it is advisable to send a
standard MIDI Bank Change message (MIDI CC# 0 with a value equal to
the MIDI Bank#) before each MIDI Program Change�
Selecting Program Change 127 within any MIDI Bank 0, 1, or 2 will put
UltraViolet into Manual Mode� In this mode, UltraViolet will be set to the
current knob and switch settings� No preset data can be stored at this
preset location�
PRESETS
ACCESSED BY
Favorite setting (accessible via MiniSwitch)
See
page 12
for details�
MultiSwitch Plus - footswitch 1
MultiSwitch Plus - footswitch 2
MultiSwitch Plus - footswitch 3
Manual Mode ("knobs")
pg 24
Advertisement
Table of Contents
