External Control
Using MultiSwitch Plus
Selecting and saving UltraViolet presets using MultiSwitch Plus�
NOTE: Footswitches A, B, and C on MultiSwitch Plus correspond to MIDI
Program Changes 1, 2, and 3�
1
Step on a switch that is not illuminated to recall the corresponding
preset�
2
Step on an illuminated switch to bypass UltraViolet�
Saving UltraViolet Presets with MultiSwitch Plus:
1
Dial in the sound that you would like to save as your preset on
UltraViolet�
2
Press and hold the UltraViolet footswitch for at least 2 seconds, until
the LED blinks GREEN�
3
Press the A, B, or C MultiSwitch Plus footswitch to save the current
state of the pedal to the desired location�
pg 17