Table of Contents
Advertisement
Configuring UltraViolet to Use MIDI
STEP 2 – SET MIDI CHANNEL
3
Turn the SPEED
channel� The LED indicates status� Your knob selections are as
follows:
• Channel 1:
• Channel 2:
• Channel 3:
• Channel 4-16:
Program Change message, requires 1⁄4" MIDI connection
Once the LED turns BLUE, it will blink until the pedal receives a
MIDI Program Change message� Once a message is received, the
pedal will be set to the MIDI channel that carried the message and
exit the Power Up Mode to allow you to begin using UltraViolet� (If
you've successfully configured MIDI Channel 4-16, you can skip
4
item
on the next page�)
blend
chorus
vibrato
MODE
INTENSITY
SPEED
MIDI
CHANNEL
vintage vibe
(MIDI
CHANNEL) knob to set the MIDI communication
GREEN
(default, minimum)
AMBER
(10 o'clock)
RED
(12 o'clock)
BLUE
(maximum) - set by next received MIDI
(continued)
mid
low
high
BIAS
VOLUME
pg 20
Advertisement
Table of Contents
