Strymon ULTRAVIOLET vintage vibe User Manual page 33

Power Up Modes - Quick Reference
Global parameters and functions can be accessed via a power up
procedure� All power up functions persist through power cycles�
1 Press and hold the footswitch for at least 2 seconds while powering
up UltraViolet� Once the LED flashes RED, release the footswitch�
2
Adjust the desired functions with the controls noted below�
3
Press the footswitch to store your changes and exit Power Up Mode�
POWER UP MODE
BYPASS MODE
FOR MONO I/O
See page 8
for an illustrated
description�
EXP/MIDI JACK
MODE
See page 9
for an illustrated
description�
MIDI CHANNEL
See page 20
for an illustrated
description�
*NOTE: Also see
pedal functionality per preset�
Set the BIAS switch - status shown on the LED
• True Bypass: switch in the low (left) position - LED
GREEN (default)
• Buffered Bypass: switch in the high (right) position
- LED RED
Turn the VOLUME knob - status shown on the LED
• Expression:
• Favorite: AMBER
• Tap: RED
• MIDI: BLUE
Turn SPEED knob - status shown on the LED
• 1: GREEN
• 2: AMBER
• 3: RED (12 o'clock knob position)
• 4-16: BLUE
by next received MIDI Program Change message
"Expression Pedal Setup" on page 11
OPTIONS
GREEN (default, minimum knob position)*
(11 o'clock knob position)
(1 o'clock knob position)
(maximum knob position)
(default, minimum knob position)
(10 o'clock knob position)
(maximum knob position) - channel set
to configure your
pg 33