Panasonic DMR-E20 Operating Instructions Manual page 91

1
2.3.4.5
1
ACTION
Changing the unit's settings
I .=o°,an.e, Se.,n
YOU can use the ACTION menus to start Auto Channel Setting if Plug4n Auto
Tuning (-_ page 16) fails for some reason,
1
Press [ACTION].
The ACTION screen appears.
2 Use the joystick [_1, I_] to select the
Set Up tab.
3
Use the joystick [&, V] to select "Chan-
nel Settings" and press [ENTER].
ACTION Set Up
_i ¸¸ i ¸
4
Use the joystick [&, T] to select "Auto
Channel Setting" and press [ENTER].
Check the antenna
system. Automatic
setting is performed
based on the current
antenna system•
.... ]tP, r
rni?ll nI1R]TSFJ Ik't_m i
2
3"4 t 5
[_lhll_,lllll;I Ib_l I till
V When you press]ENTER]
Connectantennacableandif youusea
cable box,tune it toyourlocal PBSCH
then...
l
If clock setting is complete, the "Auto Channel Setting" screen appears• '_
If youhave not yet set clock,the "Auto Channel/Clock Setting" screen appears,
Press [ENTER].
c. II
When finished
rJli?ll_ i _ i i i i [;! ih,,_l i { i i ii
CN Ra
Auto channel setting (or auto channel and auto e_.ck selling) stads This takes
a few minutes When finished the Complete screen or time display is shown
Press ]ENTER]•
eThe channels are set based on (he currently selected antenna syslern
• To stop auto channel setting
Press ]RETURN] RoTFn_