Panasonic DMR-E20 Operating Instructions Manual page 87

2.3.4-5
DVD
ACTION
n] J]_t_ [Ii H;1_'[_1111 t [
2
ml?l HM'_i,_ hlll
Changing the unit's settings
Preparation
Switch [DVD, TV] to "DVD",
L
1
Auto Clock Setting
While stopped
Press [ACTION].
The ACTION screen appears
2 Use the joystick [<, I_] to select the
Set Up tab.
3 Use the joystick [A, T] to select
"Clock Settings" and press [ENTER].
):2:
4
Use the joystick [&, V] to select "Auto
Clock Setting" and press [ENTER].
] /,,ulo CloCk SeCin g ]
_" When you press [ENTER]
Connect a ntennacableand if younona
cable box,tune it toyourlocal PBSCH
then...
5 Press [ENTER].
u)
If channel setting is complete, the =Auto Clock Setting" screen appears.
ifyouhave net yet set channels, t he "AutoChannel/Clock Setting" screen appears.
Auto clock setting (or auto channel and auto clock setting) starts. This
can take some time, up to a lew hours in some cases The following
screen appears when setting is complete.
AutoClockSelling is complete.
==Check that the time was set correctly, if it was not, LJse manual c{ock
setting (_ page 88) or time zone adjust (m page 89) to correct it.
elf you connect the unit through a cable TV box or DSS receiver
(-- page 76), tune to your _ocal PBS station before starting auto clock
setting. Use manual clock setting (-- page 88) if this does not work.
elf there is no local PBS channel in your area, then auto clock setting
may not work correctly
In this case the time must be set manually {=* page 88)
IIz[';jl_
eDST. Daylight Saving Time, shows the summertime setting (. page 88)
• TIME ZONEshows thelime dinerer_e Irom Greenwich meantime (GMT) (=, page 88)
EST-GMT 5, CST-GMT 6, MST-GMT 7, PST-GMT 8,
AST-GMT-9 HST GMT-10
For other areas: xx hr
• When you change the time zone, the recordingtimes for programs recorded before
the time zone was changed also change to correspond to the new time zone
• To stop auto clock setting
Press FRETURN1 ROT_